Browse Resources

This video, from Chippewa Valley Technical College, goes over uploading the Teach Pendant program from RoboGuide to the actual robot controller. "The video demonstrates making the required adjustments of points, movement types, and verification of desired operation." The video covers the following...

This video, made available by the STEM Guitar Project, was recorded at the Guitar Build Institute held at Aptos Middle School in San Francisco, California in 2018. In the video Alex Moll demonstrates neck scraping and sharpening during electric guitar construction. The video runs 6:40 minutes in...

This video from CUNY Kingsborough Community College describes negative staining. The brief demonstration is described step by step and would be easy to replicate in a laboratory setting. Running time for the video is 1:32.

This video, published by the Nanotechnology Applications and Career Knowledge Support (NACK) Center at Pennsylvania State University, offers an overview of the operation of the Veeco Innova Scanning Probe Microscope (SPM). During the video, presenter Sebastien Maeder from Pennsylvania State...

This webinar, published by the Nanotechnology Applications and Career Knowledge Support (NACK) Center at Pennsylvania State University, provides an overview of optical lithography. During the presentation, Atilla Ozgur Cakmak from Grand Valley State University introduces optical lithography and...

This five-page instructor guide from Edmonds Community College provides a laboratory activity introducing students to the properties of metals using a paper clip. In this activity, a paper clip will fail after being bent multiple times, demonstrating the concept of fatigue. Students will compare and...

This video from CUNY Kingsborough Community College describes the parts of a micropipette. The demonstrator describes each part of the device and what it is used for. Running time for the video is 2:45.

This video from CUNY Kingsborough Community College describes how to perform a gram strain. The brief demonstration is described step by step and would be easy to replicate in a laboratory setting. Running time for the video is 1:46.

This six-page instructor guide from Edmonds Community College outlines a one-session laboratory activity demonstrating the effects of phase changes in metals, with a focus on high carbon steels and nickel titanium (nitinol). After completing this activity, students will be able to discuss the...

This video from CUNY Kingsborough Community College describes the process of pipetting. The brief demonstration is described step by step and would be easy to replicate in a laboratory setting. Running time for the video is 2:27.