Pneumatic Double-Acting Cylinder - verify fittings, pressure, not damaged

Common Component Failure Problems

• Cylinder is not moving.
  • Verify component has flow and correct pressure.
  • If no flow, verify hoses are hooked up correctly and not leaking.
    • Fix hoses.
  • If incorrect pressure, check upstream in the system. 
    • Fix pressure or issue upstream.
• Cylinder doesn't move smoothly or stutters.
  • Possible internal damage, such as seals worn out.
    • Replace component.
• Rod does not come out correctly or all the way.
  • Possibly internal damage such as a bent rod or the inside of the cylinder is pitted.
    • Replace component.

Troubleshooting Instrumentation/Tools

• Gauges
  
• Observations
• Flow Meter

Troubleshooting Step-by-Step Example

Additional Troubleshooting Information

Related Parts:

• Single-Acting Cylinder
• Double-Acting Cylinder with Cushion

Schematic: 

Where to Buy:

Large - Automation Studio

Small - Automation Studio

Unless specified otherwise, any and all work on this page is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.